Does a heat exchanger remove humidity?

A standard air-to-air heat exchanger primarily transfers heat between two airstreams and does not directly remove humidity. The airstreams remain separate, so moisture (humidity) in one airstream typically stays within that airstream. However, there are nuances depending on the type of heat exchanger:

1. Sensible Heat Exchangers: These (e.g., most plate or heat pipe exchangers) only transfer heat, not moisture. Humidity levels in the incoming and outgoing air remain unchanged, though relative humidity may shift slightly due to temperature changes (warmer air can hold more moisture, so heating incoming air may lower its relative humidity).
2. Enthalpy (Total Energy) Exchangers: Some advanced designs, like rotary wheel or certain membrane-based exchangers, can transfer both heat and moisture. These are called hygroscopic or enthalpy recovery ventilators (ERVs). The core material or wheel absorbs moisture from the humid airstream (e.g., warm, humid indoor air) and transfers it to the drier airstream (e.g., cold, dry outdoor air), effectively managing humidity levels to some extent.
3. Condensation Effects: In certain conditions, if the heat exchanger cools humid air below its dew point, condensation may occur on the exchanger’s surfaces, removing some moisture from that airstream. This is incidental, not a primary function, and requires a drainage system.

So, a standard heat exchanger doesn’t remove humidity unless it’s an enthalpy-type ERV designed for moisture transfer or if condensation occurs. If humidity control is a goal, you’d need an ERV or a separate dehumidification system.

Related articles

• ZiBo QiYu manufacturer
• Plate heat exchanger for drying linen in hotels and laundry industry
• Heat exchanger for sludge drying
• Plate heat exchanger for drying beef and pork
• Total heat recovery ventilation technology for home decoration fresh air system