Air to Air Sensible Heat Exchanger for Evaporative Cooling Air-Conditioning & Wind Power

Structural characteristics of
·BXB sensible heat exchanger can be made of seawater corrosion resistant hydrophilic aluminum plate,epoxy resin aluminum plate or stainless steel plate;
·The heat transfer surface of the heat exchanger was strengthened by heat transfer stamping,and the heat transfer area was increased by 10%-12%;
·The heat exchange sheet adopts enhanced punching and biting technology,with higher strength,better sealing,and air leakage rate less than 1%;
·The air passage is supported by a conductor convex cylinder with a high pressure difference capacity of 2500Pa for new exhaust;
·The normal service temperature of ordinary aluminum foil is not higher than 100℃;the temperature resistance of special sealing material can be up to 200℃;the temperature resistance of stainless steel can be 350℃;
·Tap water or neutral washing liquid can be used for direct cleaning,which is easy to use and easy to maintain;
·Different plate spacing(2.0mm-10.0mm)and any combination length can be provided.
Air to Air Sensible Heat Exchanger for Evaporative Cooling Air-Conditioning&Wind Power(图2)
application
·AC Ventilation System
·Room Ventilation System
·Industrial Ventilation System
·Heat Pump Drying System
·Indirect Evaporative Cooling System
·Large-scale Scientific Breeding Bystem
·Purify Air Conditioning Fresh Air System
·Wind Generator Air to Air Indirect Cooling System
·Heat Recovery in Winter
·Cold Recovery in Summer