1. The enthalpy/adsorption rotor dehumidifies and cools the hot and humid outside air.
2. The cooling coil further dehumidifies the outside air until the requested humidity level is reached.
3. The sensible rotor reheats the outside air to the required supply air temperature.
4. At the same time, the exhaust air is cooled which increases the efficiency of the enthalpy/adsorption rotor.
The wheel is built up by a matrix that consists of two foils, one flat and one corugated;together, they create channels for the air to pass through. The wheel is rotated by an electricmotor and belt drive system.
In one half of the rotation, the exhaust air from the inside space flows through the matrix. ltsheat is stored in the matrix, and in the other half of the rotation, it is transferred to the freshsupply air from outside.
The size of the channel is called well height. Different well heights and diameters of thewheel give different efficiencies, pressure drops, and airflow rates.
Rotary heat exchangers that are properly constructed, installed, and maintained have almostzero transfer of particle-bound pollutants.
The main component of the rotary heat recovery fresh air unit is a disc-shaped heat storage wheel, which is made of aluminum foil wound into a honeycomb shape as the heat storage body. During operation, fresh air passes through one half circle of the heat exchanger, while exhaust air flows in the opposite direction through the other half circle. The heat storage wheel rotates continuously at a speed of about 10 revolutions per minute under the action of the power mechanism, and the heat storage body is constantly heated on the high-temperature half circle side, absorbing heat; When rotating to the low-temperature semicircle side, it is cooled and releases heat. This process repeats itself, recovering some of the energy (cold and heat) from the exhaust air into the fresh air. A moisture absorbing material is coated on the surface of the aluminum foil to create a fully heated rotor. The moisture in the airflow enters the moisture absorbing coating and is released when the rotor reaches another airflow. The composition of the rotor type heat recovery fresh air fan is to use the exchange of sensible and latent heat between the fresh air and exhaust air to recover energy, achieving energy conservation and maintaining good ventilation. In summer, the fresh air can be pre cooled and dehumidified, and in winter, it can be preheated and humidified.
Main features:
Corrosion resistance: PP material has strong chemical corrosion resistance and is suitable for acidic or alkaline gas environments, especially performing well in industrial environments with strong corrosiveness.
Lightweight: Compared to metal heat exchangers, PP material heat exchangers are lighter in weight, making them easier to install and maintain.
Good thermal stability: Polypropylene has good thermal stability and can typically operate within a temperature range of -10 ° C to+95 ° C.
High cost-effectiveness: Due to the low cost of PP material and relatively easy processing, the overall cost is relatively economical.
Environmental friendliness: Polypropylene is a recyclable polymer material with minimal impact on the environment after disposal.
Main application areas:
Chemical and pharmaceutical industries: used for heat recovery or temperature regulation of corrosive gases.
Exhaust gas treatment system: During the air purification process, heat is recovered from harmful gases through a heat exchanger.
Food processing: In some food production processes, it is used for gas exchange to maintain the stability of environmental temperature.
HVAC system: Used in the ventilation and air conditioning systems of buildings for air preheating or pre cooling, improving energy efficiency.
The plate type air-to-air heat exchanger made of polypropylene material has become an ideal choice for many specific industrial fields due to its unique corrosion resistance and good cost-effectiveness.
In the counterflow heat exchanger, two neighboring aluminum plates create channels for the air to pass through. The supply air passes on one side of the plate and the exhaust air on the other. Airflows are passed by each other along parallel aluminum plates instead of perpendicular like in a crossflow heat exchanger. The heat in the exhaust air is transferred through the plate from the warmer air to the colder air.
Sometimes, the exhaust air is contaminated with humidity and pollutants, but airflows never mix with a plate heat exchanger, leaving the supply air fresh and clean.
한국어 
English 
Deutsch 
Français de Belgique 
Русский 
日本語 
Português do Brasil 
हिन्दी 
Español de Chile 
ਪੰਜਾਬੀ